What would be the problem with the I6 gear? I did not grind the gear at all. The dizzy set down into the engine fine with out any problems. I did...
I used the one off the old 258 l6 and it seems to be working fine?
Well Ill be.... someone snuck a odd ball lifter in the mix. If you notice the push rod cups you will see. Sorry the pic is not that great. The one...
Tim, I know my 78 J10 AMC 360 had what they called a 10.95 guess that means 11". I am not sure about the other years. I installed a...
The push rods are all the correct length (9.6) and true. The lifter plunger is extended all the way to the lock ring and will not collapse. I...
Well I pulled the head and the back two lifters look like they will not bleed down. This is a sad site to behold. :cry:
Howdy All, I have a good one... I was driving down the road yesterday and started to hear a ticking and the engine started to miss. I removed...
My god you are the man ........ Guess i will try a new sending unit.
Howdy all, The jeep rebuild is almost to the end, but I have a small problem...... I replaced the temp sending unit and replaced the wire from...
Nice work... You must be a jeep nerd R) I think I can work this out. Thanks for the Help Ron
Well I am running a header, so I think that will take care of the exhaust problem with using the 81-on aluminum intake manifold. I did pick up...
That I did not know. What carb? a Ford 2100, Weber or a holley 2 bbl of a 70 318? Thanks Ron S
Howdy all, Well got the 232 back together and she runs good. I did the HEI swap and replaced the Headman 3 into 2 with a 6 into 1. I would...
I want in !!!!!!!
Not to highjack this thread, but will this work on my 74 232? I have the HEI and was getting ready to swap it over when I thought, I better double...
Separate names with a comma.