Not mine but VIN 10067, ad says ‘53(?) obviously a ‘55. One of earliest I’ve seen....
The idea: mechanical oil pressure gauge for f-head cj5, purchased cj3b gauge and lines, (rubber hose and steel line). The issue: thread for...
Well, Love, Newgren, and Monroe all made plows and discs for Willys, and even maybe some others. Does this "disc plow" have any I.D. plates on it?...
My t 90 had caulk covering the rear shift rail holes from the previous owner. In a rebuild and removed the caulk, now I've been looking for caps...
The coolant in the radiator looks tubulent, like the water pump is moving it I had assumed, not like air bubbles persay, unless they are really...
I haven't checked the temp wth a thermometer but the water coming out of the overflow is not hot to the touch, only luke warm (would not burn your...
Here's the problem: Recently rebuilt motor (f134), rebuilt radiator (1 year ago), 7# cap. Everything is fine when running with cap removed...
So I am assuming that if I was, to say, remove the 2 front head bolts to attach a governor, that I should loosen and retorque all of them in...
An interesting note, the owner's manual I have dated 9-55 (the 1955, second edition, which includes info on the cj6) has the 0-8 black face dial...
Dam! This site has finally failed me. I guess I'll have to ask Santa for a picture.R) So I guess no one has a governor on their old f-head. Thanks.
Didn't the jeep 101 made in brazil come with the 90 hp 161 f-head? So it should fit in a cj, haven't seen a picture in the engine bay though....
Looking for a picture of a Novi governor in a cj5, esp. the placement of the hole for the cable in the firewall and dash. Also clear throttle...
early '55.
When did the factory switch from the flat top radiator (like m38a1), to round top version? Anybody know, or care? And should the hoses be smooth...
I'd have to measure them, but both my 40% seat and the regular passenger seat fit the same next to my 60% seat.
Thanks for the photos, just what I needed.
does anyone have a photo of the throttle cable from the firewall to the carb.? the factory manual picture isn't exactly clear where it attaches...
I have one off a 3b, but it's too short to fit on a 5, the stabilizer arms do not reach the frame.
The question is: if you have a flatfender length shaft to go between the pto shifter and rear gearbox and the cast iron adapter to lengthen it for...
Do what I do, just get out the cherry picker and pull the engine every night. You can get pretty quick w/ practice, just sucks in the rain/snow....
Separate names with a comma.