Might not seem like much to some of you guys, but you know what they say about baby steps, right? Also installed a USB outlet to charge devices...
Lesse, where should I start? :? Most of the "old timers" here know that I picked this Jeep up as a "roller" a couple years ago (traded a...
OK, so I have the dual-chambered master cylinder bracket that I salvaged from that DJ5C that I parted out a while ago, and I want to get a new...
Can anyone tell me how long-tall (roughly) an F-head block is? Just want to compare it to the OM616 I got sitting on the floor to get an idea...
Are there one or two wheel bearings on each side of the D27?
Did I remember seeing something on here about special or a certain part number for front brake hoses for the 11" drums? Jog my memory guys!...
Just got my D18 back that I bought from neptco19 and had sent to Herm for rebuilding. When I unpacked it I discovered that the neandethals @ DHL...
Where would the VIN number normally be located on a '79 CJ7?
Well it seems as though my 7s frame is not in as good a shape as I initially thought. :( Anyone here ever use these Safe-T-Caps? I have a...
What diff ratios were normally found in the Quadratrash-equipped CJ7s? I have acquired a '79 that has a 304/TH400(727?)/BW1339 combo.
Are there any Jeep radiators out there that have the bottom outlet on the PASSENGERS side?
Napaonline sez that the clutch disc on a CJ with an :hurrican: and a T90 should be 8.5", yet Brian gave me one off of Wimpys old engine today and...
On the ECJ5/M38a1, was there a valve of any kind on the dash to turn the wipers off and on, or was this strictly controlled by the big chrome "BB"...
This arcticle states "For those with longer wheelbases or strange drivetrains(ME!:roll: ), an adapter is available from Advance Adapters to turn...
What is the skinniest transmission that can be mated to the Dana 18?
I was just over reading at http://www.novak-adapt.com/knowledge/t90.htm And I was wondering if the "T90J" described in the link above is the...
OK, so my current game plan is to attempt to use a Benzo pressure plate with a Jeep clutch disc. According to napaonline.com, the F-head/T90...
Lets try something that I don't believe has been done here. I plan on mating the engine out of my newly-acquired Benzo 240D to a T90 in my M38a1....
Trying to mock up my manual Saggy with Herms tie rod set. This is what is happening when I try to make a full left turn: [IMG] What is...
Doing some more dismantling on my parts Jeep. Whoever worked on this thing last definitely did NOT know what they were doing and liked to lose...
Separate names with a comma.