hey i have afriend with an 81 cj5 he wants to know if there is a good cheap swap for a bigger gas tank, the current one is an 11 gallon with a...
i was just wondering what a good radiator wuld be to put in my 70 cj5 with a 4.3
does anyone know of a good site to find these 4.3 parts? thermostat housing distributor fan pulley valve covers crank pulley timing cover...
now that i can get a rebuilt 4.3 cheaper than a 231 i need to know exactly what i need to do for the 4.3 swap, i have looked on novaks site but i...
hey hansh wich kit did you get from novak?? i looked on the site and saw one but it doesnt work for the 225 bellhousing
just wondering if antone here has put a hydraulic clutch set up on a 225 bellhousing and a t-90 trans i have a few i deas that i think will work...
i was just wondering wich shocks to get for my '70 cj with an SOA?, i obviously cant go with stalk length and when i do order some how do i get...
thanks for the info i will look into it
anyone here know where i can get some extended front braided brake lines for my '70 cj? i bought some goodridge extended lines but they still...
hey thanks so much for all the input guys you have saved me a bunch of time and money , and also im not sure how to fill out my profile so if you...
i was just wondering if i could swap my 225 for a 231 with very minor changes, i think i herd somewhere that the bellhousing is the same on both...
i was wire wheeling my trans / tranfercase today and noticed that the front yoke seems to be exended about 5 inches from the transfercase its kind...
i would not recommend wheel spacers to gain more tire offset, i work at discount tire and have herd horror stories about wheel spacers, if you...
i buought my whole set yesterday at thejeep.com hard line and stainless steel soft lines they have all the clips and s lines also
hey i know this is a stupid question but were can i get a set of u bolts for my d 27 ? i can get some made a six states but i would rather just...
thanks for the info it has given me some ideas to think about
hey does anyone have some good ideas for a high steering knuckle on a dana 27? i have already checked out some plans i found here, but just...
pictures would be GREAT my jeep is a 1970 and i am converting to power steering i allready have a GM 4 bolt power steering box and have boxed in...
just one more qustion before i dive into my saginaw steering project. do i have to modify the front cross member to fit the steering shaft...
Separate names with a comma.