Oh, I should have mentioned...brown only.
I don't know if you ever get into Maine, but... There's a junkyard in Mexico/Rumford that has 4 or 5 passenger van/ busses that were used to...
Cj5 tub sounds like a good deal.....
Update.. The bottle has 2 separate pumps. Neither seem to be pumping. Is it possible that the motors run, but don't actually pump. Sorry, this...
I installed a YJ wiper washer bottle in my 74. I combined the windshield and rear window tubes with a "Y" fitting hoping to get more pressure to...
Yeah, I didn't mention that I pulled the delay harness section, as well. So, I just need to jump that into my existing harness and mount a 4 wire...
So, I was in the local junk yard recently to pull some under-dash courtesy lights out of a YJ, and what I saw blew me away.... Someone had...
I pulled a cj7 tilt column with pedals and brackets a while ago and plan to swap it into my '74, at some point. Seems like the angle will be a...
The hose to intake on my junk yard pull was cut.......Is there a one-way pressure valve off from the intake, or just the one in the grommet of the...
That's what I was thinking.
Will do.
I havent read anything about changing lines, other than to accomodate the fittings on the engine side of the yj mc rather than the fender side...
Yet another spin-off. I picked up a Yj mc/booster/prop valve. Right now I have 11" drums all the way around. What combination of MC and prop...
This is kind of a spin-off from a previous thread...... I have a Dana 44 front end and I'm not really sure what it came from. It has 11" drums....
Speed nuts. If you need the plastic, let me know.
Went to my local pick n pull today and found that someone had dropped off a mid 80's Laredo. I got the factory clock, tach, and intermittent...
Ok, forgot to mention that I have a 44 up front, so my donor rigs won't help. I did pick up a YJ booster/mc/prop valve at a junk yard today for...
Oh yeah, you mentioned that you had to drill the holes in the firewall. Did you use the bracket, or go directly on the firewall with the booster?...
Pics would be great! I've never swapped brakes. i have 2 junk CJ7's as donor vehicles.
Yeah, I assumed things would be a little different. It looks like the mounting holes in the firewall match the holes in the 76+ booster bracket....
Separate names with a comma.