Just stripped out the small screw and brass block that holds the choke wire to the carb. Looks like the brass block is rivited on. Anyone know if...
Will a padded dash fit a 70 CJ5? Ours has three plastic plugs and the wiper wiring harness comes out of the area the pad attaches to. Will the...
Just got my 2bbl Rochester back from being rebuilt and I cant remember which mounting gasket to use. The rebuild kit came with 3 thin ones and one...
Our stock 2bbl intake needs replacing and just wondered if there is an aftermarket aluminum intake available that will work with the stock...
Is there an online step by step instructon on how to rebuild a 2bbl Rochester off a 70 CJ5 V6? Thanks
Anyone know where I can find an exploded view of the single stick transfercase shifter assembly on a 70 CJ5 ? Thanks
Does anyone know if the single stick shifter mount(part on the left) has a bend in it or if it should be flat. Ours is bent and before we...
Any comments about the quality of the reproduction OE style steering wheels on the market for a 70 CJ5 ? Thanks
I was told this came off a very early CJ5 but Im not sure. Can anyone identify it? Thanks [img]
Anyone reproducing the padded dash for a 70 CJ5?? What year CJ5s used the same style padded dash? Thanks
Anyone know where to get a new strainer for a fuel sending unit? Thanks
Anyone have a problem installing the felt seals on a D18 transfercase? The ones in our kit seem too large for the yoke. Thanks
Anyone know if NAPA carries replacement parking brake shoes for a 70 CJ5 V6 ? If so what is the part number? Thanks!!!
Do original front bumpers mount with one or two bolts on the bottom? Our frame has one bolt hole on the top and two on the bottom. ??
Are there any NOS or repro gas tanks out there for a 70 CJ5 V6, under seat,and with the twist in sending unit??? Krage and Kaiser-Willys says no. :(
We were getting ready to order a stock repro bumper and steering wheel for our 70 CJ5 and wondered what everyone thought about the quality of...
Does anyone know where I can get a new AC fuel pump or the AC part number? Thanks
Just finished a clutch job on our 70 CJ5 225 project and took her out for her first spin in two years and woah....... We're not sure what axle...
Just finished putting in the rebuilt starter and the diagram I wrote down only had 2 connections and now there are three! Can anyone tell me how...
Is there an online diagram or pic for a clutch cable on a 70 CJ5 225 V6? Mine goes from the clutch lever, to a bracket, around a floor support, to...
Separate names with a comma.