I'm hoping that some of you out there may have done this mod, and can provide some guidance. My mechanic brother rebuilt an SM 465 for me with...
What am I doing wrong? I slide the shift housing up, and it stops at a certain point. Is there a trick or something I need to do to get it to...
Greasy and upper floor plate. Thanks!
A few people said that some might be looking for this piece, but I have no idea what to call it. Could you please help me out. Accelerator plate?...
In my part of Ohio, Rick Riley is a guy who every early-Jeeper knows or has sought his advice at least once. I talked with him about finding a...
Tom, I just updated my project post...
Here are some pictures of my progress so far. [IMG] Using my school's ban saw to make more precise cuts. Good thing I get along with the...
Update: After trial and error I discovered some errors in my plans. The worst error was that I calculated the overlap of the stacks to be only...
I had never considered mounting the springs directly through the frame. My plan was to add a 4" lift. Mounting the springs directly through the...
Wow. Those are cut perfect. What did you use?
I am in the process of building a new 2 x 4 x 3/16" frame for a 1967 CJ6 and have lots of scrap that can probably be made into the front and rear...
Awesome looking CJ2! Thanks for the pics. So it looks like you have the 2x2 coming straight off the frame (though welded to a plate as posted in...
Thanks.
Could you send or post pics of yours? I would greatly appreciate it.
I am in the process of building a stacked frame for a CJ6. I have a 225 Dauntless that came off of a 1967 CJ5. I have the original frame but the...
Okay. After a lot of conversations and everyone's input I decided to scrap my efforts so far and build my own "stacked" frame. I have studied...
Ha! Maybe a little nerve or bad memory asking questions on the Welding Web. Its all good.
Thanks. The welds pictured in the photos of the Jeep frame were not mine...thankfully. I plan on cutting and grinding the angle iron off. The...
I'm pretty set on trying to fix this one. I have a lot of steel laying around, and time to kill before my project fund builds up. If in the end,...
Separate names with a comma.