I want to take the CJ5 to Jeff City for the Reunion this weekend, but it won't start. I'm not getting spark, so i replaced the points,...
I wanted to replace the goofy steering wheel the PO had put on, so today I decided to get it taken care of. I had a donor steering wheel that I...
Unless I'm blind, I don't think my '70 Dauntless V6 has a Temperature Sending unit. The FSM says it should be on the manifold, but I can't find...
Has anyone ever wired a Sparton turn signal using the Painless wiring kit? This thing is driving me crazy! I need to know what wires from the...
My '70 has the 225 V-6 with fenderwell headers and the PO mounted the mufflers under each door opening. Here is a pic showing the relationship:...
I drained my transfercase to change fluids then realized I can't find a fill hole. Looking at the Service Manual, everything shows there should...
I've been trying to get the brakes working on the CJ3A (single resevoir type master cylinder). While trying to bleed the brakes, there was no...
I decided to start trying to find where the brake fluid is leaking in the 3A today. It looks like a leaky wheel cylinder (big surprise :) ), so I...
I got some extra parts that came along with the CJ3A that I recently bought, and in that stuff is a complete rear PTO set-up, shifter, driveshaft,...
I think the CJ has a rod knock caused from thinned oil from a flooding carberator. It is not real loud and the engine was only run off and on for...
It was a nice sunny day out and I didn't have to work for the first time in I don't know how long. So I decided to work on the Jeep to try to get...
I need your guys help. When I picked up the newest Jeep, I missed a few parts from the hard top. The PO has graciously told me he will see if he...
On the frame horns on the new Jeep I just aquired, are plates welded to the them, but they do not apear to be done as a repair, but rather for...
I wanted to get the CJ running again before I went to redo the wiring ('70 with 225 V6). I recently put on a new fuel pump because the old one...
At the Willy's Fall Reunion, there were a couple of restored M38A1's on display that I snapped some pictures of. I finally got to see what some...
I was reassembling some of the parts on the Jeep and noticed that the rubber on the footman's loops that support the windshield where in bad shape...
Does anyone know if there is a way to tell if an early Jeep Speedometer is 6v or 12v? I pulled a real nice condition speedo from a Willy's pickup...
I thought I would save myself a little cash and install an new piece of windshield glass to replace my shattered old one. The auto glass...
I'm having a new windsield glass cut and I'm going to install it into the frame myself with help from the glass guy (they don't do auto glass). I...
I'm in the process of refurbishing my heater in the CJ5. I have a heater set up out of a '71. [IMG] The diaphrams seem to still be in...
Separate names with a comma.