I have a 66 CJ-6 with the fuel tank under the drivers seat. I ended up with a Autometer #2516 Gauge. Somehow I determined my sender was of the...
I was lucky enough to find a used herm-the-overdrive-guy MC frame mount bracket -thanks to Kamel. Now I need to order a new MC from that list I...
I bought hi-temp auto wire from KayJay Co. in various gauges and colors for about $55 and did my own re-wire job including fuse block and volt...
I'm inclined to buy a new unit over a rebuilt one. With the same PN, could the Dorman be a re-branded Wagner ? there is a big spread on their...
10w30 is rated up to 85 F while 10w40 is good for higher temps up to 105 F IIRC. So take your pick. Of course in the winter you will want a 0w or...
Continuing the brake upgrade saga, I've done the research to determine which Master Cylinder would be usable when doing a frame mounted upgrade so...
I had a similar issue with a new gauge but mine turned out to be a soggy float.
My calipers came with 2 copper crush washers... I assume they are for the banjo bolt connection, thye are sort of rounded and look like they will...
I have the complete heater and the cardboard duct around here somewhere I took off my 66. Let me know if you need it. In Arizona we enjoy the cold...
Thanks but that is too much $$$ - I'm on social security and have to watch every cent now. I'll check the classifieds, thanks
Continuing to pound my head ...:dead horse: I made up a comparison spreadsheet with about 29 different part numbers shown as compatible for 65-76...
The Dorman and NAPA replacement M/C for a 77 K-10 uses a 1 1/8" dia. I know other things like weight will enter into the sizing but that should be...
I think this _might_ be a pic of the one I was thinking of (he mentions it is a 67-71) but, it too needs frame/bracket work to be mounted.... so I...
According to the research I did so far, there really is an elusive dual reservoir side mount MC that is just like the Single you mentioned. I...
I thought the 67-71 frame mounted bodies were different from the one you show. I know all the parts lists show those numbers you mentioned but I...
Thanks Nothing came up on that PN though. What year Econoline? I tried 67 but it too drew a blank. If I use something other than an OEM...
That is really nice, to be able to mount the fluid remotely, put them where you can see them and fill them easily, but ouch that is pricier than I...
I have the 77 C/K-10 4x4 calipers mounted now and need to get brake hose and banjo bolts. This kit looks like it will fit my stock hardlines and...
I'm now at the point you were.... What M/C and brake lines did you go with? Was it a dual reservoir, frame mounted replacement? Any problems with...
I came up with 41 1/2" C/L hole to hole. I took a couple 1/2" alum C channel used to mount bookshelves to the wall and mounted them flush with...
Separate names with a comma.