1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another Master Cylinder request

Discussion in 'Early CJ5 and CJ6 Tech' started by Syber4x4, Aug 8, 2011.

  1. Aug 8, 2011
    Syber4x4

    Syber4x4 New Member

    Arizona
    Joined:
    May 21, 2011
    Messages:
    48
    I was lucky enough to find a used herm-the-overdrive-guy MC frame mount bracket -thanks to Kamel.
    Now I need to order a new MC from that list I posted earlier. I went to all the local stores and none of them have any of the listed models in stock for me to look at.

    If anyone has one of the listed models, I would like a measurement between the center-lines of the two mounting holes on the oval flange. The bracket holes are 3-3/8" apart. The MC models I am looking at are the following:

    Centric 130-63010
    Cardone 1x-1292
    Bendix 11373
    Dorman 56193
    Wagner 56193

    I can oval the holes slightly to make a different spacing work but I would rather buy the one with the same spacing, so I would appreciate it if someone has one they can easily measure.

    Thanks
    Al
     
    Syber4x4, Aug 8, 2011
    #1
New Posts