I'm rebuilding a '75-'77 Buick 231 odd fire v6, and I had the crank shaft ground down 0.010 for the main/rod bearings. I've got a copy of the FSM...
I've got a '75-'77 231 oddfire that I'm collecting parts to rebuild. Some time back, I put a new stock clutch in it and resurfaced the flywheel....
231 v6/SM465/D18 combo, only ever really driven in low range off road. A while back my jeep started acting up. I'm getting a loud but low...
My current D18 has a 1 1/4" intermediate shaft, and was rebuilt not too long ago including a hardened intermediate shaft. It now has a cracked...
I've currently got a D18 in my jeep with the 1 1/4" intermediate shaft. I broke the case and chipped a bunch of teeth off of the gears, so I...
I'm about to rebuild my d18 again (broke a bunch of teeth off the gears of my current one), and I have one question I never really figured out the...
I'm about to go pick up a CJ2a, does anyone know the overall bumper to bumper length on one of these? I've got a 12 foot long dump trailer that I...
I'm parting my jeep out, and I have no idea what the engine's worth. It's a '76 231, which I'm told is the last year of the oddfire and has the...
So I ran a not so straight driveshaft for several hours on the freeway, which ended up taking out at least the rear tcase bearing, and the seals...
I snapped a rear axle shaft off inside the carrier, so I'm trying to weld a couple of welding rods together and tack them to the piece of the axle...
I was planning on going back to stock exhaust manifolds and modifying the driver's side manifold so that it dumped straight down and missed the...
Right now my battery is in the front passenger corner of the engine compartment, and the fan blades on the alternator have cut into it a couple of...
So gear oil is leaking out from the rear output on my transfer case. A lot. A decent sized puddle within 5 minutes easy. The seal only has 100...
So I went wheeling today in some rocks down town. I ended up grenading the front loc-right locker, my steering colum is dead, and I was taking it...
My jeep still doesn't have any shocks on it. I've been driving it around town for a while now and don't miss having them at all, the only time it...
I'm trying to get rid of my headers and go back to exhaust manifolds, but the clutch slave cylinder looks to be right in the way of the driver's...
I've decided to make my own exhaust system by buying tubing and a bunch of U-bends, and then cutting them to the right angles and welding...
I was climbing a hill, and my battery fell out of its holder and got cut open on the fan piece on the alternator. I know, I know, I'm making a...
I've stumbled across an 8000 pound PTO winch setup for a CJ6 for what i think is fairly cheap. Is there any way to use both a PTO winch and an...
I'm nearing the end of my jeep build, and am about to go drive it around. I have the rear spring perches tack welded on right now, and have a...
Separate names with a comma.