1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Making an exhaust system

Discussion in 'Early CJ5 and CJ6 Tech' started by 61CJ5, Jul 18, 2005.

  1. Jul 18, 2005
    61CJ5

    61CJ5 Member

    Lafayette, CA
    Joined:
    Feb 9, 2003
    Messages:
    188
    I've decided to make my own exhaust system by buying tubing and a bunch of U-bends, and then cutting them to the right angles and welding everything up. The only catch is I don't know how to tie it all in to the exhaust manifolds. What piece do I need to attach the tubing to the manifolds, and where can I get it?
     
    61CJ5, Jul 18, 2005
    #1
  2. Jul 18, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    Manifold flair. If you have a crossover on it now cut them off and use if its still good. If not go to you local muffler shop and get them to flair you a couple of pieces about 12" long, That'll give you enough to work with. I have noticed them at FLAPS from time to time, you'll need 2" pipe.
     
    jd7, Jul 18, 2005
    #2
New Posts