1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cj5 Worm Tube

Discussion in 'Early CJ5 and CJ6 Tech' started by tripilio, Apr 20, 2020.

Tags:
  1. tripilio

    tripilio Proud American!

    Hi, when I disassembled my CJ5 steering, the Ross box was a complete mess. I am almost ready to put it back together but I need to purchase the worm tube and the outer tube. The one that came with the Jeep measures 41 1/2", but I have seen also 42" that would "fit". Since I have no idea what the PO did here I want to be sure I purchase the correct one. I found a nice NOS 42" but I don't know if it would work. Any ideas/suggestions? Thanks.
     
    tripilio, Apr 20, 2020
    #1
  2. Steve's 70-5

    Steve's 70-5 Active Member

    There was a different Ross box on the V6 and the 4 cylinder. The V6 box was a little heavier constructed, I believe they are interchangeable. The PO could have changed things out, just a FYI
     
    Steve's 70-5, May 7, 2020
    #2
    tripilio likes this.
  3. Keys5a

    Keys5a Sponsor

    Before investing in a new inner tube/worm, carefully check your sector shaft. The two nubs that engage the worm are known for severe wear. These sectors can be hard to find for a quality original, and the reproductions are very questionable quality.
    Again, a WTB in our classifieds might be an option. Sorry, but I don't have any good spares here. The V6 and M38a1 steering boxes are a bit beefier and interchange.
    -Donny
     
    Keys5a, May 7, 2020
    #3