I have a 1979, disc brake dana 30 I want to put in my 1974 cj5. I have read the pitman arm is clocked differently on later model axles and the box...
Hi Guys—72 CJ5 steering. Ordered a lower point joint from Barney. The boot that came with it looks like it’s made for a steering shaft with two...
Hi Guys—‘72 CJ5 My steering is completely trashed, and it is sketchy to drive. The lower joint, u-joint, and bushings and bearings in column all...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] I’ve read through the power steering pics post several times over the years as well as other post on the...
Hi there my dad and I have had this Jeepster since I was a kid. I finally have the income to really start working on it and need some advice. The...
Working on the front end this weekend, and attempting to follow Moses Ludell's instructions to upgrade the spindle / knuckle mating bolts from the...
Can I use 00 grease for my ross box?
Hi, when I disassembled my CJ5 steering, the Ross box was a complete mess. I am almost ready to put it back together but I need to purchase the...
My father and his friends put power steering in his '46 CJ2A in 1970-71 or so. These days, the steering had a LOT of play. Most of this seemed to...
My '66 Commando has a manual steering box and a stock 3.73 Dana 27AF front end. I'm looking to swap it to power steering and to a narrow dana 30...
OK so I have a 69 CJ 5 That steered great at high speeds with the original Dana 27 frong axle. I recently rebuilt a 1972 Dana 30 and swapped it...
Most of you probably already know who Moses Ludel is, as he has been involved with jeeps at a professional level for several decades. He has...
Separate names with a comma.
