1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What Did You Do To Your Jeep Today?

Discussion in 'Builds and Fabricators Forum' started by Focker, Jul 23, 2016.

  1. 62CheepJeep

    62CheepJeep Member

     

    Attached Files:

  2. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Cool story though! Life is about memories made!
     
  3. 62CheepJeep

    62CheepJeep Member

    Absolutely true. And Dad and I made a ton of memories. I cherish every one of them.
     
    fhoehle likes this.
  4. 62CheepJeep

    62CheepJeep Member

    Painted the JEEP and WILLYS logos
     

    Attached Files:

    fhoehle, homersdog, Focker and 2 others like this.
  5. 65seejayfive

    65seejayfive Blazin’ new trails

    Well done! Did you do it by hand? I used on of these:
    [​IMG]
    I’ve heard it done by hand, a roller, foam brush, and also stickers. Also, it is my understanding from a recent documentary that the Jeeps of this era never came painted white or black from factory but rather painted at the dealership. It looks great painted (y)
     
    Hellion likes this.
  6. 62CheepJeep

    62CheepJeep Member

    I did it by hand with a foam brush I cut to 5/16” wide. I used Rustoleum gloss black enamel paint.
     
  7. neohic

    neohic Gentleman Jeepist

    Went for coffee this morning.

    [​IMG]
    [​IMG]
     
  8. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Yes that is CAT yellow. Looks nice.
     
  9. 62CheepJeep

    62CheepJeep Member

    Thanks

    Tomorrow the wiring harness will be installed. Can’t wait. Ready to take it for a spin again.
     
  10. colojeepguy

    colojeepguy Colorado Springs

    I got in a fight in that parking lot once....got my *** kicked and needed 4 stitches in my scalp :(
    There may have been beer involved....
     
  11. tomasinator

    tomasinator Member

    I installed the passenger seat frame today in my '68.
    [​IMG]

    The tricky part was the seat bracket (the part on the right) was originally missing. ITLKSEZ suggested a new one could be made out of hardware store 1/2" black gas pipe. He said he could make the bends with his pipe bender. I made the two tabs that allows the seat frame to pivot up and be removed.
    [​IMG]

    I borrowed a seat bracket from another jeep so ITLKSEZ could use it has a template. He did more than make than make the bends in the pipe. He welded on the tabs and fashioned and welded on the feet. (Original, top, ITLSEZ's clone, bottom)
    [​IMG]

    I drilled mounting holes in the bracket, painted, and installed it. Here's a closeup of ITLKSEZ's craftsmanship.
    [​IMG]
     
    Hellion, Muzikp, ITLKSEZ and 9 others like this.
  12. 62CheepJeep

    62CheepJeep Member

    Nice job on the seat bracket
     
    sgogpn and Lockman like this.
  13. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    [​IMG]
    and again he shows his nice work (y) hope you got to look at projects while you were there :D
     
    Lockman likes this.
  14. 65seejayfive

    65seejayfive Blazin’ new trails

    In all seriousness, ITLKSEZ should start making these. You can’t find ECJ5 seat brackets anywhere and no one is reproducing them. Fantastic job!
     
  15. colojeepguy

    colojeepguy Colorado Springs

    X2, nice craftsmanship!
     
  16. tomasinator

    tomasinator Member

    Yes, I got to see all the amazing stuff he's been building. One of the highlights was getting a ride in his plow jeep. I had no idea a jeep could go the places he took me.
    [​IMG]
     
    Muzikp, ITLKSEZ, 73 cj5 and 2 others like this.
  17. Focker

    Focker That's a terrible idea...What time? Staff Member

    Great teamwork!
     
    Lockman likes this.
  18. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Given the quality of the OEM welds for the pivot tabs on mine, you probably ended up with a better than new bracket...nicely done to both of you.
     
    ITLKSEZ, Norcal69 and tomasinator like this.
  19. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    I agree. Had a really hard time finding mine.
     
    jjdebarros likes this.
  20. Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nice Fabrication , ITLKSEZ..... your a Jack, my friend ! BTW, Focker is this hijacking. I can't post a new thread today ?
    Any hoooo, This is what I did to my 1975 CJ5 today. ( Possible Quiz at the end ? )
    Before Lettering.JPG
    After Lettering.JPG
    OK.. WTH Quiz : Is there a difference in the font Pre 1975 ? What is that difference :
    1) Nut'n
    2) AMC eliminated the Bar over the 'J ' & changed the font slightly for 1975
    3) I discovered that I bought my '75 with a '74 Tailgate ! ( Ask me how I Know ? :oops: )
     
    fhoehle, ITLKSEZ and 65seejayfive like this.