I'm glad at least it's a 225 0dd fire to a 225 odd fire. I had a 231 even fire with 20K miles on it, got it installed, and it had METRIC...
If you can specify the years of the vehicles in question or better yet part numbers we may be able to help. You might also consider calling Paul...
I went back and read the original post on G503. Not much has changed, except the 'secretive' group Bob N referred to has completed their quest....
This is the Engineering document that shows how production serials were tracked after Nort Young stopped [ATTACH]
I had the same discussion this week with some of Barney Roos's relatives. I'm sending them bits and pieces of his history they were unaware of....
CWGEN was Charlie's email, and Terry Howe ran the Jeep List, so you've obviously pinned down the March 1998 date the data was made public. I tend...
I recall your original post on G503 and may have responded to it. The Nort Young list I referred to was one and the same. When Charlie shared...
It's about 300 pages without any decoding of serial nomenclature so if it ever gets printed it's not going to be anytime soon. The engineer I...
I bought that data about 25 years ago from a retired Jeep engineer to publish a book on Jeep serials. (This is not the Nort Young Data) Derek...
Is the KH number 103599? They are aftermarket for CJ Jeeps and Full size Bronco. Very sought after.
http://www.cj3b.info/Photos/SerialNumbers/SerialNosMonthly6567.gif Mid June 1966 ?
I'm glad to know where one of them was delivered. The dates you provided align quite well with the sales documents, but not yet with the...
A friend of mine asked me to do some research on a reported 462 a few months ago. I know the 462 press release exists, but I don't know if it was...
.05 degrees of total front toe is approx equal to .025 inches of toe. You want .06 inches to .125 inches of front toe in. Yes, your front...
FWIW the 8000 pound PTO Koenig for CJ3A used 150 feet of 5/16 with 6x19 with a hemp core.
Separate names with a comma.