Jeep looks real solid. Why not find a TBI 350 doner and drop it in, injection, ecu, and all?
what are you planning to run for engine management?
You'll be miles ahead of me using a gn motor as a starting point, but I can't see starting all over when my engine has less than 1000 miles. I...
I got my ECU (megasquirt 2), coil pack & driver (Audi v6), trigger wheel and pickup (ford edis 36-1 wheel), GM 4.3 TBI, GM 2 bar MAP sensor, and...
That was 8:1 static, add in the stock 10psi of boost and effective is about 13.5:1. Granted the GN engine had forged internals and piston squiters.
Found a source for MLS headgaskets in varying thicknesses. I should be able to get away with a decent amount of boost going this route: [IMG]
Thanks for your input, I'm open to suggestions. I may look in to an MLS style headgasket to lower the compression a bit. will 231 gaskets work?...
2psi will bring my effective compression to 10.06:1, and will add very little power. 7psi will bring my effective compression to 13.13:1, rather...
Here's the turbo just about where it will be mounted. I need a drivers side manifold for the passenger side so I can route the exhaust around the...
The turbo I've got will spool at 1500rpm on the 225. It should make about 250hp at 4000rpm and I'll have the benefits of EFI as well. I'm going to...
So I've been enjoying my Jeep for the last year, but it's now time to continue the project a bit. My plan is to fit a GM 4.3 TBI, audi bosch...
i love the herculiner in my tub, just make sure you go over it with their top coat so it won't fade. I also used the herculiner as undercoating on...
I bought some 1" fire hose cut for use a chain covers from a member like 4-5 years ago, I still havent gotten to the point of using them, but I'm...
Made a little more progress today, still need to hit the dash wiring and fix the front right brake (Jeep dives to the left when brakes are...
Got her painted finally, now I just need to put it back together. [IMG] [IMG] [IMG] [IMG] [IMG]
Separate names with a comma.