I have power steering as well. You can still steer, just not gonna make a sharp turn with it in 4 wheel. The wheels turn, but the jeep still...
I have a lock-rite in a dana 25 and it works flawlessly. However, I would recommend the twin stick setup, so you can switch to 2-Low when turning...
How "thick" is it ? Could it be the spacer behind the bull gear ? The one that goes on the trans output shaft before you slip the bull gear on ?
Not sure if you are talking about the same thing, but I found out the bearing "spacer" is NOT the same. What I am talking about is the ~1/4"...
Can anyone tell me if the mainshaft bearing spacer on the transmission output shaft (in front of the bull gear in the transfer case) is the same...
Salvage yard. I got mine out of a Ford truck, I think. Anything with dual tanks - stock. My 1980 Chevy 1/2 ton with the saddle tanks has one...
With the OD, I'd say 5.38 all the way with the little 4-banger.
Are there valve stem seals on a stock f-head ? I see what looks like umbrella type intake valve seals on the engine I am working on. I thought...
My experience with Rancho 5000's is that they are STIFF ! Go with a stock replacement if the rig is mostly stock - that will yield the best ride....
That looks great !
Het Sammy - Give me a call at 280-8101 about the gas can holders. I'm just west of Cottonwood mall and if I remember right, you're in Rio...
You do AWESOME work - wish I was that motivated....
Very cool ! I just bought an M38 and am starting to gather the parts to replace/fix those that are missing- Mine has seen a rough life...but I...
Separate names with a comma.