HELP!!! Ran into a snag with my son’s 66 CJ5. The issue is the starter on the 4.3 vortec swap ripped off the block because the previous owner...
Well, I got the taillights working, but the blinkers still don’t, even after replacing the flasher with an LED compatible one. But I noticed that...
It’s clearly a 3-pin. I wasn’t sure if there were any specs that made some compatible or not, besides the pin layout. Thanks for the tip on the...
I know I already have a thread on wiring, it that is specific to troubleshooting my 66 CJ5. I’m specifically asking what you have use for LED...
Can’t find the hazard switch anywhere in a store or from an online retailer. Fortunately, there was one on an eBay auction that ended today, and I...
I’m guessing these two bolts are where it should be? [IMG]
Thanks for the help. I am beginning to think there’s a relay that flashes somewhere that I haven’t found in the signal chain. I took a long 16 ga....
Will do. The detailed writing diagram I found through Google showed the wiring but not the specific colors.
Well, after redoing all the grounds, the LED taillights light up, but they don’t work for brake lights or turn signals, and I think I found the...
Sorry for the spelling error… it is the “stop light switch” listed on the diagram. Not sure what it is or what it physically looks like. Thanks...
So my son’s CJ runs amazing, but the taillights and front turn signals don’t work right. The previous owner mounted nice LED tail lights, but I...
Separate names with a comma.