I used Brennen's brackets on all four wheels on my 2a. While tacking the spacers may provide a little more security, I haven't experienced any...
Looking at it more closely, I think that bell housing has a couple extra holes in it.
I use a Milwaukee 5/8” Hole Dozer hole saw in my drill press to cut the swage out of hubs. I did all four for a disc brake conversion on my 2a...
The diameter of the bearing retainer hole should offer a clue. The SM 465 front bearing retainer measures 5-1/8”, (larger than most). The bolt...
I guess this depends on what you have available for space and equipment. My "skyhook" is a tractor and I do not have the head room in the garage...
Good catch Oldpappy. I don't really put many parts in the broiler :). I've used Kroil for many things over the years, generally with better...
I don't know that the Dana 25 has a crush sleeve. I believe the preload is set with shims similar to the rear 41s and 44s . I've had some pretty...
I believe the rear bearing caps will interchange just fine. But I don't see any way that you could mount the TC drum brake to a truck style cap. I...
Separate names with a comma.