You need a wire from the hot side of the solenoid to the batt terminal on the switch. Then you should have a wire from the start terminal on the...
Used hubs come up all the time in the classifieds here; there are plenty of old school all steel hubs floating around. As an aside I have free...
A long time ago I read of some guys putting bananas in a rear end in an emergency-it was a Land Rover in Africa somewhere IIRC.
My 67 has the little thingy on the windshield frame that keeps the hood from flopping on your neck, but maybe they quit putting them on for the 68?
In my limited experience that doesn't look right. How big a hurry are you in? I got mine off ebay for about $75 and there was a steel version on...
Would cosmoline work maybe under some taped on plastic sheet till the permanent repair can be made? As far as matching the paint color my PPG...
In the model airplane field you can use anti-freeze in a crock-pot to clean baked on castor oil off aluminum parts with no bad side effects,...
In my 47 I replaced the hat channels when doing the resto with white oak which is the original material. I then encapsulated the whole deal with...
Or you might take it to a radiator shop to be boiled out and then treated with whatever you decide on. Probably cost more than the method Tim...
The Carter should have a baffle on the top for the choke and one at the bottom for the throttle. The Solex won't have a baffle for the choke as...
What he said-tank fits with a little fiddling to the strap and is a quality piece.
I wish I had some of those cool skids for my exhaust--they's neato.
Makes sense. Could you use a breather that has a filter in it instead of running a/the hose to the air filter assembly?
I just put a Holley 4-barrel carb on my Dauntless and I'm wondering how much travel is there available in the standard linkage set-up. I don't...
Separate names with a comma.