I bought a cheap hei from them also. I installed it and the jeep wouldnt run, messed with it for a couple hours and then bought a new coil for a...
I am putting a t 18 in my cj. I am useing a scout t 18 and ford t 18. From the scout, the output shaft and adapter to the dana 20 with all of...
Advance auto has them for $40, I am looking for the same thing. I am going to check with autozone, most of the adapters are $20 except for the...
I am thinking of buying a spacer for the 4bbl intake so I can use the 4bbl carb. And I guess I will buy a cam. I just have to figure out the...
My problem with the 4 barrel is the stock intake is a odd bore pattern and will not let the butterflys open up, I will need a spacer. I dont know...
i have a cj5 that i am swapping a 360 into, it used to have a 258. I have a couple options for carbs. the 360 will have a stock cam and...
Buy new body mount bushings. You can buy just the body lift blocks on ebay, I think for $2.99 each. I like body lifts( small ones) it makes it...
For power brakes on my cj5 I used a M/C from an XJ. I made a spacer for the firewall and made a new brake pedal rod.
Tie rod flip maybe. Like he said, put it on the ground and check it out.
So, without a lot of modification and money it will not bolt to a 360 or dana 20? I guess I will put the t19 back in the barn.
I just found a t-19 tranny in my dads barn. It is from an IH 3/4 ton truck 2 wheel drive. Does anyone know if I could use it on my jeep. In the...
Yes I was thinking of removing the BL and going to SOA, but I have not decided yet what to do. I am thinking that SOA would be too high. I have...
Anyone??
Separate names with a comma.