1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

I just found a t-19 tranny

Discussion in 'Intermediate CJ-5/6/7/8' started by oteps, Mar 5, 2009.

  1. Mar 5, 2009
    oteps

    oteps New Member

    Joined:
    Nov 5, 2008
    Messages:
    22
    I just found a t-19 tranny in my dads barn. It is from an IH 3/4 ton truck 2 wheel drive. Does anyone know if I could use it on my jeep. In the jeep i have a t-150 tranny and a dana 20 t-case. Since its 2 wheel drive i dont think I can use it and I am not going to buy a $500 adapter for it. I looked on novak's website and found some info. But I think all of the info was for a 4x4 tranny. Any info would be great, thanks.
     
  2. Mar 5, 2009
    LarryD

    LarryD Member

    Gallup NM/ 4 Corners
    Joined:
    Jul 7, 2006
    Messages:
    637
    Just went thru this, wont work for a Jeep conversion.
     
  3. Mar 5, 2009
    LarryD

    LarryD Member

    Gallup NM/ 4 Corners
    Joined:
    Jul 7, 2006
    Messages:
    637
  4. Mar 5, 2009
    oteps

    oteps New Member

    Joined:
    Nov 5, 2008
    Messages:
    22
    So, without a lot of modification and money it will not bolt to a 360 or dana 20? I guess I will put the t19 back in the barn.
     
  5. Mar 5, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Yeah, I think the combo of Binder + 2WD makes it fairly useless for our Jeeps. You might try advertising it on BinderPlanet to see if there is any interest.
     
  6. Mar 6, 2009
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    The only thing useful are a few of the gears inside. Sell it to someone with a Binder or put it back in the barn.
     
New Posts