If you have removed all four of the Bell housing to Transmission bolts... or all of the Engine to Bell housing bolts. Then you must have the...
In the compression test. You do a standard compression check with the gauge connected to each cylinder (one at a time). Crank it over a few...
1. Check the compression both dry and with a little oil in the cylinders and report back the results. If compression is not even or close in all...
If your paying someone else to paint it, you might as well go with clear coat too. I planned on scratching mine up a bit off road, and since I...
I did this last year and I'm really pleased as well. There was one thing though... that is I bought a alternator mounting bracket from a jeep...
Here is a pic or two of mine in action!:) Click on the link... because there are a couple more pic's there as well....
Ira, at this point I would suggest that you take a series of good pictures of your electronics set up and post them so we can take a look....
X2 I've had problems setting up mine but I still agree! This is a great mod once you get it set up right!
The following is a quote from me on this subject just a couple of days ago. When I did mine, I hooked it up and cranked it. It immediately blew...
I have one. It's a 61. CJ5. Not a common item for sure. That's why Blevisay suggested you feel free to sell your Jeep or Jeep stuff on the...
when I did mine, I hooked it up and cranked it. It immediately blew the pertronix unit.. fried it. smelled smoke. No spark after initial key...
Su Rodolfo Bienvenido! Háganos saber si necesita cualquier otra cosa. Bienvenido a ECJ5.com!
Patrick: pardon my intrusion but I thought I would translate your reply, hope you don't mind. En Espanol: Los enchufes son AC44s o...
Yeah, mine was the same way. The square grommet went in with a little extra ooomph and a pair of needle nose pliers, but it works. My trouble...
Separate names with a comma.