Does any one else have this tie type of rod end. I'm having a hard time finding one that looks like it. Its a passenger side rod end with a hole...
Did you have to relocate your shock mounts on the front for more shock travel? I think I have the rears figured out such that the shocks will be...
Oh ya I forgot bumper clearence issues..I left a 1/4 inch gap under the shakle hanger and the fram on the front..I ordered 8 76' and up rear...
Pics of steering [IMG] [IMG]
Rivets on the spring and shakle hangers. It took me longer to remove the old hardware than it did to make all the parts.
3" at full turn, it has a later type tie rod and draglink setup..I can take a picture when I get home.
Mine weighs 2500-2700 depending on fuel and cargo.
What's your rigs weight?
Sorry I've been a bit reclusive lately. I've been working on a very lovely project lately involving a YJ spring swap on my CJ. The springs I had...
What kind of intake are you running??
Probbaly back to Summit.
Update: Swapped the powervalve to a 65 and dropped the jets to 44. DID NOT WORK..seems kinda funny though its lean at the botto and loading at...
Thanks man. I put 48's in and tried 44's. The 44's are way lean but the 48's are just a little rich. I'm going to try 46's and see. I ran it up at...
Separate names with a comma.
