This is what I was told. To put a CJ3B body on a CJ5 frame you needed to add one body mount. If you felt the need, you could use 3B springs so...
I guess the bodymounts are on the side of the frame on CJ5, and on top on a CJ3B - plus you have to add one more to the driver's side.
Anyone have experience with this? I have seen the stuff on the CJ3B page, just looking for more info if possible. The main reason for this is I...
Ok, so there's no OD on the jeep - it just has a 2 stick transfer case, which I still think is odd. Herm e-mailed me back and the OD (rebuilt)...
I don't think they were too close together, but then again I didn't take a lot of notice. I'm about to head over there now and take a peak...
Okay, Okay - I'll forget the 5 speed and go for a warn. I e-mailed Herm about pricing, waiting to hear back. Like I said before, this CJ-5 I...
I've done some messing around with these calculators and found that I would to go to an awfully low gear in order to match what an OD can do....
Skill and tools are not an issue - I can't imagine that replacing the gears in a jeep diff are much different than most any other open diff. I...
It just seemed to me that nearly $1000 for a warn OD is a bit steep. Are there any problems with just installing a smaller gear ratio in the...
I'm running a 225 and would like a 5-speed manual w/ overdrive. Has anybody done this? Any ideas? I know the 225 has the standard BOP...
Hey guys, new here. I have an early cj-5 with a 225 all modified, and a '55 3B. I was originally going to put the 225 in the 3b, but after...
Separate names with a comma.
