I also just plugged the second hole and it didn't seem to make any difference. Thanks for the info though.
There are two outlets on the blower housing but only one duct connected and the other outlet (drivers side) is open. Is that an intake or...
It's fixed! To anybody who has had the same leaky YF problem. Here's the fix. It is a small (5/8X1/4) rectangular metal tab with rolled down...
I finally tracked down the part in a drawer full of ten thousand little parts at a local 4X4 shop. I'm going to try it out tomorrow.
So far I've been able to rule out a bunch of stuff but no luck finding the part that seals the A pump linkage. Anymore ideas??
I've had the same problem with my 75 CJ5. It is almost stock with 1" superlift springs and 30X9.5X15 Goodyear MTR's. It is all over the road. I...
What is the model number of the Weber? So the 2bbl intake from any 258 I6 will work?
Thanks, If you pull the top off to adjust the float you will see the flat linkage piece coming up next to the float bowl. It is open to the...
I've posted before about the leaking carb on my 75 CJ5 and got some tips but it is still leaking. It only leaks on bumpy or uneven surfaces but...
I shall investigate the float! Thanks
Thanks. I think I solved the exhaust problem by welding a flat flange onto the pipe and bolting it directly to the manifold with a gasket...
The carb on my stock 75 CJ5 258 I-6 seems to be leaking gas even after a rebuild. Can't figure out exactly where but it appears to be on the...
Separate names with a comma.