I'm bored, so I thought I'd post some pictures of how my project is comming along. I'm doing the 3.8L Buick V6 thing... Got the adapter off ebay...
I'm using the 231 flywheel. I figured out already that I need a 10 1/2 standard GM clutch. The problem is I just need an application so I can go...
So I need a 10.5" GM clutch kit I believe, I'm not sure because I don't have an old clutchto look at to compare! What is the application I should...
Don't mean to beat a dead horse, but I can't find any info at all about what to do about the T90 bearing retainer! Ok, so I have my 3.8L Buick,...
steering will be alot more difficult with a locker up front. And if used on snowy roads its pretty hard to turn, you tend to just keep going...
Ok here is what I have. I believe I'm well on my way to making this work. I found a T90A-1, 18 tooth input gear. From the flat face of the...
http://www.mastercrafttire.com/us/en/ProductDetails.asp?ProdType=LtTruck&id=49&title=Light+Truck+Tires These look pretty vintage to me, I was...
Your going to need to have your motor, trans, and tcase in there final spot and be as close to your finished weight on the springs before you can...
I just read that topic, also the link in that topic to another topic! I know whats going on now! So my search is on for a T90J from a 52-65...
Ok, this is better. This is the first time I've messed with this old stuff, so everything I type I pretty much learned tonight. I think I...
Well, actually its a T90C. Its marked T90A on the side but has the 16 tooth input gear which is correct for a 63-71 4cyl. I've searched high and...
Anyone?
Separate names with a comma.