Any hot peice of metal can ignite a air fuel vapor, throw in a spark at the top of the compression stroke and your going to get your moneys worth!...
turning the distributor advances or retards timing. It matters where its pointed. you need to turn the engine over manually and get piston #1...
Get a sbc (283/302/305/307/327/350) and an SM420! Much easier swap more support IMO
What is a hard top worth? I have a CJ-5 top I bought many years ago sitting on my side yard with doors. It has good glass a couple bends very...
Keep your eyes open on Craigs and Ebay I think I see one that should be flanged and off set on there now for $300. forgive me for the ebay link...
Will a Scout II Spindle/rear hub work on a Dana 44 from my 1965 CJ-5? I'm starting to put together the parts for the full floater conversion
$100-$200 You can buy Dana 44's complete on Ebay and Craigs all day for $300. I picked up a very complete (Rancho shocks included) Dana 30...
NICE!!! Do you loan out tools?
Yeah I've always pulled the heads too. Its faster then getting 16 rockers off and I always did head work with cam swaps on sbc. Mine were all...
Really? I have always pulled the top of the motor off, heads and intake manifold, because the lifters tend to fall when you take the cam out?...
Have you tried heating it with a torch? Do you have the cover off the diff? Have you tried loosening the c clips on the carrier? Try...
I checked on ebay and craigslist today for tunnelrams. Guess I will have to add that to my watch list. How sweet would that be! My motor is...
If I had a tunnelram I would through my hood away! Posted via Mobile Device
270/280 duration 480/489 lift 111 center line Flat tappet hydro cam Its hard to resist over camming a sbc Posted via Mobile Device
Separate names with a comma.
