1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

My 67 CJ5 build

Discussion in 'Builds and Fabricators Forum' started by Johns1967CJ5, Dec 11, 2013.

  1. Johns1967CJ5

    Johns1967CJ5 Sponsor

  2. Johns1967CJ5

    Johns1967CJ5 Sponsor

    A bit of a milestone, the windshield is finally on

    [​IMG]
    [​IMG]
    [​IMG]

    Mirror from Walcks

    [​IMG]

    Also got the original grill back on

    [​IMG]
    [​IMG]
    [​IMG]

    Anyone know the thread size on the grill supports ?

    [​IMG]

    Also have to figure out why the drivers side is an inch lower than the pass side. Frame is even, so it's body related, any suggestions ??

    [​IMG]
     
    ojgrsoi, Muzikp and Fly Navy like this.
  3. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Did you mount that hand brake yet? I have the same one and I'm not exactly sure where to put it. If I mounted to the bottom of the dash there is about 3/4" sticking out from under the dash (that will surely cut my knee open).
     
  4. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Not yet, soon tho
     
  5. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Managed to save the original clips for thé grill welting

    [​IMG]

    [​IMG]

    [​IMG]
     
    73 cj5, ojgrsoi and montanacj like this.
  6. Johns1967CJ5

    Johns1967CJ5 Sponsor

    What really stinks is I can't find the title :banghead:
     
  7. Johns1967CJ5

    Johns1967CJ5 Sponsor

    There ya go
    [​IMG]
    [​IMG]
     
    ojgrsoi likes this.
  8. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Used nutserts in the hat channel for the steps, spread some neversieze in the holes to prevent rust (Yeah right)

    [​IMG]

    [​IMG]

    [​IMG]

    Also finished battery tray support, I believe factory correct

    [​IMG]

    [​IMG]

    [​IMG]
     
    TIm E and 73 cj5 like this.
  9. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    IDK the answer to this. Is the bar across the top of the battery supposed to go to the rear instead of toward the battery posts? It's metal and could short?

    My bar was not installed when I got my 70. I installed it like this.[​IMG]

    Everything looks great btw.
     
    Last edited: Aug 29, 2018
    Hellion and baldjosh like this.
  10. Johns1967CJ5

    Johns1967CJ5 Sponsor

    I thought the same but won't fit that way. The support is about 3/8" from the posts
     
  11. baldjosh

    baldjosh Member

    I like the look of that alot better!!!
    im so jazzed to see all the odds and ends coming together...nice work as always!!!
     
  12. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Actually found a photo online. Looks like you are right. My battery must be deeper than original ill look at it tomorrow again

    [​IMG]
     
  13. 55_Willys_CJ5

    55_Willys_CJ5 Nephews Visit 2017 2024 Sponsor 2023 Sponsor

    Awesome. Soon you will be out having fun in your jeep. The nuts on my radiator support rods take a 9/16" wrench and the thread on the rod 3/8"-24 (Diameter/Thread Size). Hope this helps. Each rod has two and they both come with a star washer attached to the nut.
     
    Johns1967CJ5 likes this.
  14. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    FWIW I went outside and looked and it appears we both have a group 24 F battery.

    That photo has some nice battery cables.
     
    Last edited: Aug 30, 2018
  15. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Same spot as the factory original

    [​IMG]

    [​IMG]

    [​IMG]
     
    ojgrsoi likes this.
  16. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Fixed the battery support flub

    [​IMG]

    [​IMG]
     
    Hellion, Muzikp and ojgrsoi like this.
  17. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nice HEW decal. I think it's cool. (y)
     
    Last edited: Aug 31, 2018
  18. Johns1967CJ5

    Johns1967CJ5 Sponsor

  19. Keys5a

    Keys5a Sponsor

    The shift decal location varies considerably depending on year (or month!). Most are around where yours is, but sometimes they are on the outside, or even inside the glove box door!
    Your Jeep is looking really good!
    -Donny
     
  20. Steve's 70-5

    Steve's 70-5 Active Member

    Call walck's he can make you up a new one with instructions's.