1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

73 CJ5 with 232ci has a miss

Discussion in 'Intermediate CJ-5/6/7/8' started by joe73cj5, Oct 23, 2012.

Page 2 of 2
  1. Oct 28, 2012
    sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,899
    what carb do you have? the carter yf tends to loosen up in the center and creates an internal vacuum leak check where the two halves of the carb join. the egr valve can cause a stumble/skip too its not stuck slightly open is it?
     
    sterlclan, Oct 28, 2012
    #21
  2. Oct 28, 2012
    joe73cj5

    joe73cj5 New Member

    Joined:
    Sep 29, 2012
    Messages:
    19
    I have a Weber 32/36 carb. I know that both sides of the carb are not seperated from each other since its mount is just one single hole. Does it matter? I will check the egr valve. Thanks
     
    joe73cj5, Oct 28, 2012
    #22
  3. Oct 28, 2012
    sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,899
    the yf (also a 1bbl) unscrews in half not too familiar with the Weber
     
    sterlclan, Oct 28, 2012
    #23
  4. Oct 28, 2012
    joe73cj5

    joe73cj5 New Member

    Joined:
    Sep 29, 2012
    Messages:
    19
    Does anyone know the normal jets for a Weber 32 carb for a 232 motor? Looking at jet kits for sale, I believe the PO but kn ones listed in the 4 cylinder kits. I could by the 6 cylinder kit sizes but hate to spend without some knowledge about correct sizes. Thanks
     
    joe73cj5, Oct 28, 2012
    #24
Page 2 of 2
New Posts