1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

No pedal pressure after front disc swap?

Discussion in 'Intermediate CJ-5/6/7/8' started by '74Renegade, Jun 26, 2012.

  1. Sep 5, 2012
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,279
    I have found a few, but want to find one with the correct retaining clip to minimize or eliminate any piston mis-alignment.
     
  2. Sep 5, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Check out Tri County Gear in California. In Pomona I believe, or used to be. They have a listing for adjustable push rods and Transfer case girdles ;)
    I was on their website earlier today. May have to call them though.


    Sent from my iPhone using Tapatalk
     
  3. Sep 6, 2012
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    Don Erbee Oceanside,ca
    they deal only in brakes great place and they know there stuff.
     
  4. Sep 6, 2012
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,279
    Thanks guys, I found a place locally that has tons of push rods. Just need to find some time to sneak away from work, they're not open on the weekends. :(

    Sent from my LS670 using Tapatalk 2
     
  5. Sep 18, 2012
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,279
    Ok, so the correct push rod fixed it right up. Still have a bit of air, but I can actually drive it farther and the next block. Thanks for all the help everyone.
     
New Posts