1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear brake lines across axle

Discussion in 'Early CJ5 and CJ6 Tech' started by jayhawkclint, May 16, 2012.

  1. May 16, 2012
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Anyone have pics of some good looking rear brake lines. Wanting to get them all up above the axle. Need a work of art to inspire me.
     
  2. May 27, 2012
    davet

    davet Member

    Andover, MN
    Joined:
    Jul 30, 2003
    Messages:
    164
    I ran mine along the back of the rear axle tube then zip tied them to it so that sticks and branches couldn't get under them and pull them off.
     
  3. May 28, 2012
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,507
    I'll try to get a shot tomorrow.............if I can get the crap out of the way.
     
  4. May 28, 2012
    ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    2,232
  5. May 28, 2012
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,507
    Here ya go. Not as nice as I remembered them but,...........[​IMG][​IMG]
     
  6. May 28, 2012
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,507
  7. May 28, 2012
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,507
    [​IMG]

    Sorry, it appears I can't put more than 1 photo per post. I'll test elsewhere.
     
  8. May 28, 2012
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    Mine look the same, except the one on the left axle also rungs across the top of the axle, just like the one on the right.
     
  9. May 28, 2012
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    Not a very good pic, but I made a bracket out of angle iron that my hardlines go to from the stock "T". From there I had a pair of flexible lines made to connect to the caliper. The bracket attaches to one of the u-bolts. I can get you a better shot tomorrow if you want.

    [​IMG]
     
    Last edited: May 28, 2012
New Posts