1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

need a part #.....

Discussion in 'Early CJ5 and CJ6 Tech' started by all4jpn, Mar 21, 2012.

  1. Mar 21, 2012
    all4jpn

    all4jpn Member

    fredericksburg,va
    Joined:
    Dec 16, 2006
    Messages:
    363
    all4jpn, Mar 21, 2012
    #1
  2. Mar 21, 2012
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    Did you tell them you wanted it for a D25/27 axle or just an early CJ?

    Lot of them don't know anything besides what they see on the computer screen. And that may not tell them anything.

    And you might look through the lists of vendors at the top of this forum. Might just be one close enough to you to drive to.


    Pardon me, I mean the D44 axle.
     
    Last edited: Mar 21, 2012
    1960willyscj5, Mar 21, 2012
    #2
  3. Mar 21, 2012
    all4jpn

    all4jpn Member

    fredericksburg,va
    Joined:
    Dec 16, 2006
    Messages:
    363
    i told them it was for the 44..the napa guy was knowledgable, but couldnt find it..guess i'll just do half tomorrow...
     
    all4jpn, Mar 21, 2012
    #3
  4. Mar 21, 2012
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    Can they be made out of heavy gasket material?
    We used to do all our own gaskets that way, long time back.
     
    1960willyscj5, Mar 21, 2012
    #4
  5. Mar 21, 2012
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,092
    They are a rubber seal, not a gasket.
     
    garage gnome, Mar 21, 2012
    #5
  6. Mar 21, 2012
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    chuck123wapati, Mar 21, 2012
    #6
  7. Mar 21, 2012
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    i've found its easier to find the part on their website then take the info into them, we dont have an autozone but O'reillys is the same game.
     
    chuck123wapati, Mar 21, 2012
    #7
  8. Mar 21, 2012
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    I have never had mine apart.
     
    1960willyscj5, Mar 21, 2012
    #8
  9. Mar 22, 2012
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,471
    I have also found it easy to get the part number off of RockAuto to take in if I don't have time to order them.
     
    Warloch, Mar 22, 2012
    #9
New Posts