shift forks

I am in the process of rebuilding my D18 transfer case. I bought the interm shaft and rebuild kit from Novak and started the inspection process over the weekend and found that I will need to replace the shift forks and output shaft sliding gear. My question is: are these parts still available and if so where?

Thanks,
Chip Biddle

 

pm coming your way

 

okay your pm not on evidently
need the numbers stamped on your gear, ie, 18-8-17 or similar
I also have 2 good used forks with minor wear

 

thanks for the reply; the only markings on the gear are 18822 and M8R78.
How much do you want for your shift forks?

Not sure how to turn on my e-mail so people can send PM's.
my address is cbiddle@aascworld.com

Thanks for your help,
Chip.

 

In the top left corner of this page and all the others there is a column that says
"User CP", click on it, then look for the line that says "settings and options" scroll down the column until you find "edit options" click it, when the page opens look for the "Enable private messages" about half way down the page, check mark it and then save the settings.

 

sorry, just sold that gear to another member 1 week ago
you can have the forks for the cost of shipping. $10 or less
send zip code