1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

YJ spring conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by Farmer Mike, Oct 23, 2011.

  1. Oct 23, 2011
    Farmer Mike

    Farmer Mike Member

    Butte City, Ca
    Joined:
    Sep 21, 2011
    Messages:
    121
    I have the springs but didn't think about u-bolt plates. Do I order 2 rear/ 2 front? 4 rear? Can't find anything that specifies.
     
    Farmer Mike, Oct 23, 2011
    #1
  2. Oct 23, 2011
    Im a doughball

    Im a doughball Member

    Oregon City
    Joined:
    Jan 8, 2011
    Messages:
    207
    You can run the stock YJ spring plate in the back. Not sure about the front.
     
    Im a doughball, Oct 23, 2011
    #2
  3. Oct 23, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Depends on what front you are running different tube diameters, pumpkin diameters, etc come into play here.
     
    nickmil, Oct 23, 2011
    #3
  4. Oct 23, 2011
    Farmer Mike

    Farmer Mike Member

    Butte City, Ca
    Joined:
    Sep 21, 2011
    Messages:
    121
    Well its a 27 in the front and a 44 in the back if thats any help. I just don't want to end up with a bunch of u-bolt plates for sale in the classified section.
     
    Farmer Mike, Oct 23, 2011
    #4
  5. Oct 24, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    You will need two front and two rear. The ones on the front are different from the rear. Might contact McRuff. He's made some very nice ones for people in the past....
     
    nickmil, Oct 24, 2011
    #5
New Posts