1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

O Ring Style Power Steering Pump With V Belt Pulley Interchange

Discussion in 'Early CJ5 and CJ6 Tech' started by jayhawkclint, Sep 3, 2011.

  1. Sep 3, 2011
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Tried finishing up my power steering conversion tonight. I have an O-ring style Saginaw pump with a single groove V-belt pulley that I got from the bone yard, but can't remember what application. While removing the pulley using the puller, I cracked the pulley. Need to make a run to the Pull-A-Part tomorrow. Does anyone know off hand approximately what years would have the O-ring style hose with V-belt pulley?
     
    jayhawkclint, Sep 3, 2011
    #1
  2. Sep 3, 2011
    Pack Rat

    Pack Rat Old Timer

    I live in a...
    Joined:
    Apr 1, 2006
    Messages:
    1,512
    1980 Won't affect the pulley though.
     
    Pack Rat, Sep 3, 2011
    #2
  3. Sep 3, 2011
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,882
    You can actually remove the fitting that goes into the box and replace it with a flare type if you want. Just take a 1" wrench with you and don't lose the spring that is inside. Easy swap for most all ham box type pumps. I believe the o-ring style came out in about 1980. Most didn't go to serpentine belts till about 85?
     
    Daryl, Sep 3, 2011
    #3
  4. Sep 4, 2011
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Roger, 1980-1985. Thanks!
     
    jayhawkclint, Sep 4, 2011
    #4
New Posts