1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Granny low 4 speed

Discussion in 'Intermediate CJ-5/6/7/8' started by bigjohn, Jul 11, 2011.

Page 2 of 2
  1. Jul 14, 2011
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,474
    The Scout D300 has a texas pattern mount to the tranny - internally they are the same.
     
    Warloch, Jul 14, 2011
    #21
  2. Jul 14, 2011
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,279
    If I'm not mistaken they were only available for the '79 model year, or was it 1980?
     
    '74Renegade, Jul 14, 2011
    #22
  3. Jul 14, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    VERY late '79 and '80 only.

    The Jeep 300 has a round bolt pattern to transmission similar to a 231, 241.242, etc. Also there are two flavors of Jeep 300. One with a longer rear output shaft and one with the shorter. The shorter one is about 3/4" shorter. Doesn't sound like much but can make a difference with rear driveshaft/u-joint angles. Also the shorter ones are a little bit stronger. If the speedo gear housing threads into the output housing it's short. If it is held in by a retainer and single bolt then it's long.
     
    nickmil, Jul 14, 2011
    #23
Page 2 of 2
New Posts