1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

3 Groove water pump??

Discussion in 'Early CJ5 and CJ6 Tech' started by 1968Jeep, Jun 14, 2011.

  1. 1968Jeep

    1968Jeep Member

    I have, as far as I can tell, a 1968 M38A-1 CDN-2 with an F-134 4 cylinder - with a leaking water pump -

    The problem I am having is I can only find listings for a single or a double groove pulley on the water pump - mine has a 3 groove pulley on it - and yes, I need all 3 grooves because of the power steering conversion on it.

    Any thoughts to find a new or remanufactured unit?

    Thanks for all your help!
    Chris
     
    1968Jeep, Jun 14, 2011
    #1
  2. LarryD

    LarryD Member

    They sell rebuild kits with a replacement bearing and seal so I'm guessing the pulley can be pressed off the shaft unless the military WP is different from the civilian.
     
    LarryD, Jun 14, 2011
    #2
  3. 1968Jeep

    1968Jeep Member

    I just confirmed that the rebuild kit will NOT work on the 3 groove military water pumps - the shaft is too short.....
    any ideas??
     
    1968Jeep, Jun 16, 2011
    #3