1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

232 power steering location

Discussion in 'Intermediate CJ-5/6/7/8' started by rcassettyjr, May 15, 2011.

  1. rcassettyjr

    rcassettyjr Member

    The 75 CJ-6 I picked up this weekend has a 232 with power steering on it. The pump is on the drivers side. Since the pump is on the drivers side will the hoses be the same as the V8?

    Thanks

    Bob
     
    rcassettyjr, May 15, 2011
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Yes. '75 CJ PS hoses are the same, 6 or 8.
     
    timgr, May 15, 2011
    #2
  3. rcassettyjr

    rcassettyjr Member

    Thanks. Now all I need are V8 brackets. Do you think the pulley will be correct?
     
    rcassettyjr, May 15, 2011
    #3
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Doubtful. Which Pulleys? Certainly the crank pulley will be different - the pulley on the pump may be the same ... I can look them up if you can be more specific.

    If I wanted to convert a 304 to PS, I'd look for a Grand Wagoneer to get the brackets. They show up pretty often in the wrecking yards... or post a WTB on www.ifsja.org/forums Sell the 232 PS setup as a unit - pulleys, brackets, water pump and all. I predict there will be plenty of demand for a complete 6-cylinder PS setup.
     
    timgr, May 15, 2011
    #4
  5. rcassettyjr

    rcassettyjr Member

    I will go ahead and look for a setup from a V8. Thanks

    Bob
     
    rcassettyjr, May 15, 2011
    #5