1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New Clutch Kit (Clutch Plate, TOB and Pressure Plate)

Discussion in 'Early CJ5 and CJ6 Tech' started by MoreJeep, Apr 4, 2011.

  1. Apr 4, 2011
    MoreJeep

    MoreJeep MoreJeep

    Saint Paul,...
    Joined:
    Dec 17, 2010
    Messages:
    31
    Went to O'Reily's to order a Clutch Plate for my 225 T86 66 CJ5. Kid at the counter said they don't sell the Clutch Plate by itself. It only comes as a Clutch Kit for ~$150...Clutch Plate, Pressure Plate and Throwout Bearing...It is necessary to install these as a set? Was planning on just throwing in a simple clutch plate. Guess I may be doing the whole shabang...

    Thanks


    Mike
     
    MoreJeep, Apr 4, 2011
    #1
  2. Apr 4, 2011
    technologyteacher

    technologyteacher Member

    Elkin NC
    Joined:
    Oct 12, 2009
    Messages:
    903
    You could check around. There is a place relatively close to me that rebuilds clutches, normally a day turn. We just sent a two stage clutch from an International tractor to get rebuilt. I know you can mail it to them and they will mail it back if you can't find one closer.

    http://www.carolinaclutchandbrake.com/
     
    technologyteacher, Apr 4, 2011
    #2
  3. Apr 4, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    It's best to replace them as a set hence the kit form. If the disc is worn, the pressure plate will be worn to match unless someone before you mis-matched parts.
     
    nickmil, Apr 4, 2011
    #3
New Posts