1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wheels-What fits...?

Discussion in 'Early CJ5 and CJ6 Tech' started by matt8828, Feb 24, 2011.

  1. Feb 24, 2011
    matt8828

    matt8828 Member

    Lexington, KY
    Joined:
    Oct 24, 2010
    Messages:
    132
    A dana 30 with disk brakes? I have found a set of alloy wheels that I want to get but I am not sure if the clearances will work. Here are the specs:
    15x8, 5x5.5 bolt pattern, -12mm offset, 4" rearspacing, 3.270" center bore.

    From what Ive seen on here I am not sure if this will work. The website I found them on says it will fit all CJ's from 45 to 86. Thanks for any input.
     
    matt8828, Feb 24, 2011
    #1
  2. Feb 24, 2011
    mikieboy

    mikieboy Member

    Jacksonville, FL
    Joined:
    Mar 21, 2005
    Messages:
    156
    I don't think the center bore is large enough....
     
    mikieboy, Feb 24, 2011
    #2
  3. Feb 24, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Center hole is too small.
     
    Patrick, Feb 24, 2011
    #3
  4. Feb 25, 2011
    matt8828

    matt8828 Member

    Lexington, KY
    Joined:
    Oct 24, 2010
    Messages:
    132
    Ya, i was afraid of that. What is the correct center hole? 4.25? I want a flat black wheel like this
    [​IMG]
    Anybody have any luck with anything similar?
     
    matt8828, Feb 25, 2011
    #4
New Posts