1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pictures of CJ5 tub stretch

Discussion in 'Builds and Fabricators Forum' started by DanStew, Feb 7, 2011.

  1. Feb 7, 2011
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I am looking for pics from those who have stretched their tubs to be a CJ6 size. I have seen the door openings stretched, but I would like to see where and how you cut and do the splice. The frame is not that much of an issue, i am more concerned about the tub. I decided it is going to be better for me to stretch the Jeep to have more options for a drivetrain than trying to kill my self looknig for the shortest combo. And since i have only a frame and tub, it will be easier to do at this point.
     
    DanStew, Feb 7, 2011
    #1
  2. Feb 7, 2011
    1970CJ6

    1970CJ6 new mexico air

    rio rancho, new...
    Joined:
    Nov 29, 2005
    Messages:
    630
    Dan
    Here are some pictures of the streched area on my CJ6
    Hope this helps, if you need any more just ask.

    Andrew
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    1970CJ6, Feb 7, 2011
    #2
  3. Feb 7, 2011
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Thanks Andrew!!!
     
    DanStew, Feb 7, 2011
    #3
  4. Feb 7, 2011
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Dan I looked into this pretty hard a while back, the best solution I found was add 3-6 in the door and the center of the rear wheel well. Also for a little more engine room you can stretch fenders/hood. But on a 5 that would be a lot more work than a flattie.
    Posted via Mobile Device
     
    neptco19, Feb 7, 2011
    #4
  5. Feb 7, 2011
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    yeah the 5s are a bit harder. I am gonig to keep the short snout. I plan on keeping a 4 cyl or V6. No need for a monster. :)
     
    DanStew, Feb 7, 2011
    #5
  6. Feb 8, 2011
    J Michael

    J Michael Member

    Burney, CA
    Joined:
    Sep 14, 2010
    Messages:
    151
    You might want to give some thought towards stretching the body behind the door the 20 inches like the factory did, this makes it a lot easier to get a soft top that fits without going the custom route.
     
    J Michael, Feb 8, 2011
    #6
  7. Feb 8, 2011
    cj6np435

    cj6np435 New Member

    OZ
    Joined:
    Jul 26, 2006
    Messages:
    28
    agree with J Michael
    do the cut like this

    I I
    / /
    I I

    use the angle of the inner guard

    make sure the dims of the infil are 20" and a std cj6 top will fit
     
    cj6np435, Feb 8, 2011
    #7
  8. Nov 2, 2020
    Willlb79

    Willlb79 New Member

    Spokane wa
    Joined:
    Nov 2, 2020
    Messages:
    1
    Anyone have a link to a detail strech..Doing my cj5 this winter
     
    Willlb79, Nov 2, 2020
    #8
New Posts