1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Nut sizes

Discussion in 'Early CJ5 and CJ6 Tech' started by khalampre, Jan 16, 2011.

  1. Jan 16, 2011
    khalampre

    khalampre Member

    Bryan, Texas
    Joined:
    Dec 20, 2010
    Messages:
    63
    I am in the thick middle of tearing this thing apart, but I have run into a snag. What size is the nut under the PTO cover? I know that it is larger than 1 1/4 but smaller than 1 1/2.

    Are there any other large nuts that I need to buy sockets for? Running back and forth to the parts store wastes a lot of build time.


    Thanks,

    CK


    p.s. Progress thus far
    http://chriskoym.blogspot.com/
     
    khalampre, Jan 16, 2011
    #1
  2. Jan 16, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    Probably 1 5/16". There are two possible sized depending on which output shaft the transmission has in it. They used a castle style nut which was larger and a nylon locking nut which was just a bit smaller.
     
    nickmil, Jan 16, 2011
    #2
  3. Jan 16, 2011
    Smokeater

    Smokeater Sponsor

    Browns Summit, NC
    Joined:
    Jun 1, 2009
    Messages:
    125
    Just removed one yesterday from a '60 w/ a T-90. It was 1 5/16" like Nick said
     
    Smokeater, Jan 16, 2011
    #3
  4. Jan 16, 2011
    khalampre

    khalampre Member

    Bryan, Texas
    Joined:
    Dec 20, 2010
    Messages:
    63
    Mine was a castle because it had a pin. THANKS
     
    khalampre, Jan 16, 2011
    #4
New Posts