1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pedal assembly / factory brake master

Discussion in 'Early CJ5 and CJ6 Tech' started by Dpards, Dec 31, 2010.

  1. Dec 31, 2010
    Dpards

    Dpards Member

    Redwood City, Ca
    Joined:
    Nov 4, 2005
    Messages:
    136
    Does anyone have any ideas for a pedal assembly did you use stock or make something on my 67 now it had been hacked and I'm just trying to clean it up alittle. The same goes for the master someone had put a huge booster on in and I want to go somewhat stock.
    Posted via Mobile Device
     
    Dpards, Dec 31, 2010
    #1
  2. Jan 1, 2011
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,195
    So, do you have hanging pedals now?
     
    colojeepguy, Jan 1, 2011
    #2
  3. Jan 1, 2011
    Dpards

    Dpards Member

    Redwood City, Ca
    Joined:
    Nov 4, 2005
    Messages:
    136
    Yes but definitely not factory it's oversized scrap metal
    Posted via Mobile Device
     
    Dpards, Jan 1, 2011
    #3
  4. Jan 1, 2011
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    67 didnt have hanging peddles they came up through the floor sounds like someone tried to upgrade. you might have alot of work to put it back to original.
     
    chuck123wapati, Jan 1, 2011
    #4
  5. Jan 1, 2011
    Dpards

    Dpards Member

    Redwood City, Ca
    Joined:
    Nov 4, 2005
    Messages:
    136
    Well I have upgraded to a hydraulic slave and I now remember I took off the factory clutch pedal ***. When I did the frame because I swapped to hydro so I'm thinking if I reinstall I will need to see if there's provisions for attaching the brake pedal again and remounting the master.
    Posted via Mobile Device
     
    Dpards, Jan 1, 2011
    #5
New Posts