1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Boot and seal for bell coupler

Discussion in 'Intermediate CJ-5/6/7/8' started by LarryD, Dec 20, 2010.

  1. Dec 20, 2010
    LarryD

    LarryD Member

    Gallup NM/ 4 Corners
    Joined:
    Jul 7, 2006
    Messages:
    637
    Looking for a source for the seal and boot for a steering shaft bell coupler on a 75CJ5 wi manual steering, I cleaned up the internals and removed the petrified grease and all seems OK. I have found replacement coupler for $40 plus shipping but really only need the boot /seal. i looked at Walcks, FWD hardware, Quadratic and Rock Automotive, Any Ideas ?

    Thanks,
     
    LarryD, Dec 20, 2010
    #1
  2. Dec 20, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Might try R&P. They were stocking the "rebuild kit" that was the boot and internals only. Not sure if they still do. 503-557-8911 9am-5pm Mon-Fri PST.
     
    Last edited: Dec 20, 2010
    nickmil, Dec 20, 2010
    #2
  3. Dec 20, 2010
    LarryD

    LarryD Member

    Gallup NM/ 4 Corners
    Joined:
    Jul 7, 2006
    Messages:
    637
    Ill give them a call.
     
    LarryD, Dec 20, 2010
    #3
  4. Dec 20, 2010
    LarryD

    LarryD Member

    Gallup NM/ 4 Corners
    Joined:
    Jul 7, 2006
    Messages:
    637
    Kit is on its way, will ship today.

    Thanks
     
    LarryD, Dec 20, 2010
    #4
New Posts