1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

D18 mount question

Discussion in 'Early CJ5 and CJ6 Tech' started by UncleSam, Nov 18, 2010.

  1. Nov 18, 2010
    UncleSam

    UncleSam Sponsor

    Cleburne County,...
    Joined:
    Oct 25, 2010
    Messages:
    132
    On a Dana 18 transfer case, the side mount that mounted to the frame.

    What type and size bolt & nut goes here? Mine is missing.

    Does it have a rubber mount or is it just a bolt & nut?


    [​IMG]

    I barrowed this picture a from another thread. Thanks to the one that posted it.
     
    UncleSam, Nov 18, 2010
    #1
  2. Nov 18, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Just a bolt, nut, and lockwasher iirc. The rubber mount is between the frame and angled bracket that mounts to it. I don't remember what size the bolt is though. Hopefully someone else will chime in.
     
    nickmil, Nov 18, 2010
    #2
  3. Nov 18, 2010
    dnb71R2

    dnb71R2 SuperDave 2023 Sponsor

    Grand Mesa, CO
    Joined:
    Aug 13, 2006
    Messages:
    1,362
    Mine kept getting loose, even with a lock washer. It was a 1/2" DIA bolt. I replaced it with a new 1/2" - 20 grade 5 bolt and lock nut. It seems to be working fine now.
    It's possible the hole can accept a larger bolt - maybe 9/16" DIA.
     
    dnb71R2, Nov 18, 2010
    #3
  4. Nov 18, 2010
    Corveeper

    Corveeper Member

    Chanute, Kansas
    Joined:
    Jul 29, 2005
    Messages:
    817
    Corveeper, Nov 18, 2010
    #4
  5. Nov 18, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Patrick, Nov 18, 2010
    #5
  6. Nov 18, 2010
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,519
    Probably 5 years back, the snubber assembly was still dealer available and made in USA. Give these guys a call: Lambert Auto Sales 800 639-2271 (Claremont, NH)
     
    duffer, Nov 18, 2010
    #6
  7. Nov 18, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Which one? The one that goes between the case and the cross member (earlier) or the one between the bracket and the frame (later)
     
    Patrick, Nov 18, 2010
    #7
  8. Nov 18, 2010
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,519
    I bought the earlier one (locally) but the latter version is likely also available.

    Lambert has a lot of NOS, including York seals. They are a Mopar/Jeep dealer. IMO, very good service.

    www.lambertauto.com
     
    duffer, Nov 18, 2010
    #8
New Posts