1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Cable

Discussion in 'Early CJ5 and CJ6 Tech' started by 1fastsedan, Oct 14, 2010.

  1. Oct 14, 2010
    1fastsedan

    1fastsedan Member

    Orange, CA
    Joined:
    Aug 18, 2009
    Messages:
    142
    what clutch cable are you using with the sm465/d18? i went to install the old cable not thinking how much longer my new set up is and my cable looks too short. i can hook it all up but my pedal is way to far forward or backward depending how you look at it:)
     
    1fastsedan, Oct 14, 2010
    #1
  2. Oct 14, 2010
    1fastsedan

    1fastsedan Member

    Orange, CA
    Joined:
    Aug 18, 2009
    Messages:
    142
    or do i move the d18 mount to another location? this would bring the clutch "closer"
     
    1fastsedan, Oct 14, 2010
    #2
  3. Oct 14, 2010
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,474
    I converted to a Hydro Clutch
     
    Warloch, Oct 14, 2010
    #3
  4. Oct 15, 2010
    Eaallred

    Eaallred Member

    West Valley City, UT
    Joined:
    Oct 9, 2008
    Messages:
    188
    I lengthened mine when I swapped over to my Buick 231. The adapter on my T90 pushed the motor forward from where it was. I used 1/4" rod to do it (extended not at the 'cable' portion, but the solid end of the cable assembly) and seems to work just fine.
     
    Eaallred, Oct 15, 2010
    #4
New Posts