quick tub question

so im going to start rebuilding my hat channels tomorrow....quick question since mine dont exist...lets see if i can explain it...under the door opening..the lowest edge of the tub,underneath..are the hat channels level with the low side of the tub with the floor on top of the hats...so the floor will be about 3/4 inch above the lowest lip of the body..or...is the floor level with the lowest lip of the body and the hat channels below that meaning below the body lip..

 

disregard..finally found a good pic
http://img31.imageshack.us/i/js31076985619sized.jpg/

 

I'll grab a pic for ya in a few.... half of mine are stock on the driver side, rest were homeade.

 

Maybe all mine were home made... I'll post my pic just because I want to, even though you found a pic R)
They're flush with the lip of the tub.

 

schweet..tks

 

on a CJ5 yes.... On a flatty no.