1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transmission mount

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, Sep 7, 2010.

  1. Sep 7, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Ok, so I've got the T86 out of Linus and the T15 is awaiting a pilot bushing from Herm.

    I need a new transmission mount, thinking I need one for the T15 (Intermediate), right? The usual suspects show transmission mounts, but some of the catalogs are pretty screwy in their listings.

    Right now I can find for an Intermediate Jeep is a $40 poly mount at Turner 4WD or a $4.99 mount available in the local Autozone.

    We'll see if this link works or not.
    http://www.autozone.com/autozone/pa...yKeyWord=transmission+mount&fromString=search
     
    sparky, Sep 7, 2010
    #1
  2. Sep 7, 2010
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    Last edited: Sep 7, 2010
    jpflat2a, Sep 7, 2010
    #2
  3. Sep 7, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    I'll hafta check when I get home.

    This is why I'm glad I asked!

    Thanks Jim.
     
    sparky, Sep 7, 2010
    #3
  4. Sep 7, 2010
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    you could probably fabricate something for the bottom plate
    just wanted to point out that the mount does not bolt directly into the two holes in the bottom of the trans case; this is where most folks go wrong.
    then it just becomes how much $$ you want to spend on the rubber or poly mount
     
    jpflat2a, Sep 7, 2010
    #4
  5. Sep 7, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Good to know, I was headed down that path.
     
    sparky, Sep 7, 2010
    #5
  6. Sep 7, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    That's the same mount I use with my T18. FWIW, autozone has a poly unit as well, for about 30 bucks.
     
    Patrick, Sep 7, 2010
    #6
  7. Sep 7, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Excellent.

    Thank you, Patrick.

    Good info all the way around.
     
    sparky, Sep 7, 2010
    #7
New Posts